Nanoleaf Lines Processor LED - What does the light mean?

The LED above the reset button on the Processor indicates whether your Lines are connected to WiFi or not.

Here are the 4 states of the LED, and what they mean:

1. Steady On: The Lines are not connected to a WiFi network, and are searching for a network.

2. Off: The Lines were able to successfully connect to a WiFi network.

3. Flashing (every ~1s): The Lines have timed out and were not connected to a WiFi network within 30 minutes of being connected to power. 

To resolve this, unplug the power supply from power, and then plug back in. After the boot up, the LED will change to On.

4. Flashing (every ~4s): The Lines were connected to a WiFi network, but are unable to reconnect. 

Generally this occurs if the settings on your router or WiFi have changed. To resolve this, perform a soft reset, delete your Lines from the Nanoleaf App, and set up again